Home | About Us | Instrumentation |Post Tensioning| Marble Mining |Ground Anchoring | Consulting | Drilling & Grouting| Contact Us | Publications

Joint meters are typically used for monitoring movement in discontinuities.  These have wide rage of application in civil , mining and geotechnical projects.  Joint meters are manufactured in many shapes, types and ranges of displacement in our factory.  They can be either manual read or electrical type for automatic reading.

 

Applications

Monitoring movement at cracks in sprayed shotcrete in tunnels.

Monitoring opening of cracks in concrete linings in underground projects

Detecting possible dislocation and movements of rock layers.

Early warning of any slope instability by monitoring small fissures observed in the shotcreted slopes.

Foundation deformation monitoring

 

Special Features

High accuracy

Mechanical and electrical reading systems

3D measurement

Easy installation

Water and acid resistant material

 

 

 

 

 
Typical  Specifications

 

Model:

2D

3D
Measurring System Manual/Electrical Manual/Electrical
Range ±50 mm ±50 mm
Resolution* Depending on Readout Type Depending on Readout Type

* : In case of E_Readout is 0.01 mm or higher

 

Required information for ordering

Dimensions of movement to be detected (2D/3D)

Readout system type (Manual/Electrical)

Probable Range displacement

 

Home | About Us | Instrumentation |Post Tensioning| Marble Mining |Ground Anchoring | Consulting | Drilling & Grouting| Contact Us | Publications