Payab Zamzam Group

About our factory

One of our goals has always been to have a continuous production line by our own system, by which we can keep control of the instruments quality as well as being on time when the customers are in rush. This proved not to be possible if we want to deal with local factories. Therefore we obtained a 5000 square meter land and built two machine halls with 800 square meters area. Having 150 Amps of electricity and three telephone lines, we can be in contact with our customers and operate many machines at the same time.

Our factory is at No. 130, 1^st west ave., crossing of Khordad Blvd., Safadasht Industrial Area, Shahriar. Every body is welcomed to drop by and visit our facilities.

Facilities

The following facilities are working full day in our factory to produce the instruments required for our projects in Iran:

2 machining equipment
2 Drill presses
Compressors and welding machines
2 presses to form materials and check the capacity of load cells
One oven to do special heat treatment for raw materials
Many hydraulic pumps and jacks together with gauges
a lot of other peripheral tools and deceives

Our stock

We have a lot of materials in stock to be able to provide our customers with the instruments they need in due course. Since many of our products are now standardized, we can produce many of them and provide our customers whenever they need them.

Design section and electronics department

Our success so far has been due to our dedicated staff to design and make whatever suites our customers the most in very quick time. Our Autocad experts are in fact located in the factory and they design the product and directly send it to the machining equipment. The designer is in fact in front of the machine during the production and has a close interaction with the operator and also receives the operators feed back to change the design if necessary. All of our products have serial numbers and are associated with an Autocad file where they are continuously updated when receiving feed backs from users.

Maintenance of the rigs

A part of our factory is dedicated to overhauling our drilling and grouting equipment and maintenance services. To guarantee a continuous service at sites far away from civil facilities, all the equipment should be kept in a good condition. This is only possible by having our own maintenance facilities. Our mechanics maintain and over haul the equipments that have finished their jobs in sites. Having all the required facilities (such as cranes, welding machines, compressors and painting tools etc.) in our factory, we can keep our machines ready to go for challenging jobs.